Reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. RO Technology involves the reversal of flow through a membrane from a high salinity, or concentrated solution to the high purity, or "permeate", stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane.
Industrial Reverse Osmosis Systems
225,000 to 600,000 GPD Industrial Reverse Osmosis Systems
Reverse osmosis, also known as hyper filtration, is used by our Industrial Brackish Water Reverse Osmosis System to purify water and remove salts and other impurities. It is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that have a molecular weight of greater than 150-250 dalton.
RO-500 > STANDARD FEATURES
- 8” TFC spiral wound membranes
- FRP membrane housing
- Epoxy painted steel frame
- Stainless steel multi-stage pump with TEFC motor
- 5 micron cartridge prefilter
- Power supply: 460V/3Ph/60Hz
- PLC based control panel
- Programmable time delay and set points
- Status lamps
- 115V/60Hz control voltage
- Motor starter
- NEMA 12 enclosure with disconnect and interlocking rotary handle
- Low pressure switch
- High pressure switch
- Liquid filled pressure gauges, panel mount for pump suction, membrane feed, and final concentrate Permeate conductivity monitor
- Permeate & concentrate flow meters
Get more info on Industrial Reverse Osmosis Systems - RO-500 and Water Purification Systems
